Remove Rust Stains From Tiles Using These Simple Home Remedies

Home Remedies On How To Remove Tough Stains From Tiles

Limescale is caused by calcium carbonate, or lime, which is naturally present in the water. When a surface gets wet, the water evaporates and the minerals remain.

This creates the well-known white haze we call limescale. Limescale starts as a white haze that gradually builds up. Eventually, it can even become as hard as stone. This also means: The longer you wait to clean, the more difficult it is to remove.

How do we remove limescale?

Usually, cleaning vinegar or another acidic and powerful cleaning agent is always recommended when removing limescale. Now it is the case that acid removes scale, but some regular cleaning products can also attack the tile. So always be careful! And before cleaning the entire surface, always test how the product reacts in an inconspicuous place.

We recommend using the Moeller HMK R159 Tile and Sanitary Cleaner. The HMK R159 is a specially developed cleaner for glazed and unglazed (ceramic) tiles, Cotto, and brick tiles.

Removes dirt, lime and soap scum deposits, grout residue, construction dirt and light grout smears. For interior and exterior use on glazed and unglazed ceramic tiles.With this product, you can remove limescale, dirt, urine stone, and light soiling from soap scum. Dirty tile joints are also cleaned again.
To process the HMK R159, first, allow the substrate to cool down to its natural temperature. So always switch off any underfloor heating.

Depending on the degree of contamination, the HMK R159 can be diluted with warm water ranging from 1: 1 to 1:20. You can maintain the following:

Heavy pollution: Between 1: 1 to 1: 5
Average pollution: Between 1: 6 to 1:15
Light pollution: 1:16 to 1:20

Pay attention:

With the HMK R159, beware of acid-sensitive surfaces such as eloxal, various plastics, enamel, marble, travertine, mirrors, and other non-acid-resistant surfaces. Always read the instructions on the bottle carefully.

Thank you for reading. We hope there is enough information on how to remove limescale from ceramic tiles here. Do you still have questions about this topic? Feel free to use the contact form at the bottom of the page.

It is very common in every house that as time goes by, things that you own aren’t going to be as good as new. That’s because you use these things and that usage could leave some stain and another kind of trace of being used.

For example, the usage could leave the stain, crack, discoloration, and much more.

It is totally not a big deal and you don’t have to resist doing your activity just so you can avoid stain, because as long as you know what to do with those mark, such as how to remove tough stains from tiles, you’ll be able to deal with it and having your things clean as good as new in no time.

Easy remedies to remove rust stains from tiles

If you want to know how to remove tough stains from tiles, it is actually very easy and simple.

First of all, you could simply brush it with some detergent and the stain usually would fade. A small piece of advice for you, the brush that you use should have a hard and stiff texture, therefore it will be able to fight the tough stain.

If you want the result to be effective and last for a long time, you need to regularly clean your tiles before the stain is making permanent stays on your tiles.

Although you’ve tried to clean them regularly, there will be a certain kind of stain that will stay even if you rub them as hard as you can.

This kind of stain might have been there for a long time therefore, you need special knowledge on how to remove tough stains from tiles. And don’t be surprised, because it is actually very easy too. All you need to do is just pour some baking soda on the stain and then flush them with hot water after some time.

The stain will have vanished, but if it’s not disappeared entirely, you can repeat it several times until it’s completely gone. Try it and see how effective it is to remove tough stains from tiles.

Sometimes, stain on your tiles has been there forever. Therefore, it could be really difficult to get rid of. Then how to remove tough stains from tiles if baking soda doesn’t work?

Well, you can add some vinegar or lemon to add more acidity that can break the stained particle. Therefore, the stain will be gone easily. Don’t forget to flush it with hot water to make the stain washed away faster.

Furthermore, using a detergent that has a strong chemical reaction could also help. However, always remember to use gloves when using the detergent and try not to put the detergent in the wrong place, especially in places where children can find it.

Your home should be the place where you can feel comfortable and healthy. Therefore, every spot should be clean and sparkling.

However, that doesn’t mean that you cannot do anything fun at risk of making a stain on your tiles.

You can still be having fun and doing whatever activity you want to do. However, just remember to have some baking soda in your kitchen just in case you are going to need to clean something up. And that is the best way to remove tough stains from tiles.

You might also like one of a great article about Tips and Tricks on Choosing Bathroom Accessories for Small Spaces and see also about Ideas for Bathroom Color Schemes.

Most Popular

Beautiful Bathroom Color Schemes

Ideas for Bathroom Color Schemes: Paint Color for Walls, Ceilings and Floors

Colour schemes for bathrooms really depend on the space that you’re working with as well …

Leave a Reply

Your email address will not be published. Required fields are marked *